Friction Saw Cutoff Machine for ERW Tube Mill | High Precision, Efficient Metal Cutting

Laminatoio per tubi in acciaio al carbonio ERW

Tube Mill Machine Compose

Macchina per la formatura a freddo

Linea di taglio a nastro in acciaio

Linea di taglio a nastro per bobine di acciaio al carbonio

Bobina di acciaio tagliata a misura

Attrezzature ausiliarie e pezzi di ricambio

Friction Flying Saw Machine

The friction saw is an online flying cutting system that uses high-speed rotating HSS blades to generate heat through friction, enabling efficient hot cutting of steel pipes. It is especially suitable for continuous production of carbon steel pipes, offering high-speed performance with relatively low operating cost. Compared to cold saws, friction saws are ideal for medium-to-large diameter pipes with moderate wall thickness.

Dettagli del prodotto

Contatta ora

Dettagli del prodotto

Video

Descrizione del prodotto

2. DATI DI PROGETTAZIONE DI BASE

La progettazione della linea proposta si basa sulle seguenti specifiche:

Parameter	Specification
Applicable Pipe Diameter	Φ12.7mm – Φ406mm
Applicable Wall Thickness	0.5mm – 16.0mm
Saw Blade Diameter	Ø600mm – Ø1600mm
Main Motor Power	55kW – 160kW (variable frequency drive)
Max Cutting Speed	60 – 120 m/min (synchronized with line speed)
Cutting Length Range	4 – 12 meters (adjustable)
Length Tolerance	±3mm
Blade Cooling Method	Air cooling with optional nozzle blowers
Control System	PLC + HMI + Servo tracking system
Cutting Type	Single-blade (standard) or dual-blade (optional)
Saw Blade Type	65Mn , 8CrV type

3. Friction Saw Selection Guide

Item	Recommended Range	Notes
Pipe Diameter Range	Φ12.7 – Φ406mm	Match blade size with max pipe size
Max Wall Thickness	≤16.0mm (Carbon Steel)	Best for structural/general-purpose pipes
Blade Diameter Options	300mm/600mm / 800mm / 1000mm / 1250mm / 1600mm	Larger pipes require larger blades
Main Motor Power Range	55 – 160 kW	Depends on pipe size and cutting load
Line Cutting Speed	80 – 120 m/min	Works with servo-driven tracking system
Pipe Clamping	Pneumatic or hydraulic (double-sided)	Ensures stable cutting at high speed
Structure Type	Single blade (standard) / Dual blade (for heavy pipe)	Dual blade recommended for thick-wall pipes

4. Friction Saw vs. Cold Saw – Comparison Chart

Category	🟠 Friction Saw	🔵 Cold Saw
Cutting Principle	High-speed frictional heating and hot cutting	Low-speed, high-torque mechanical cutting
Blade Type	HSS (High-Speed Steel) friction blade	TCT / HM (Tungsten Carbide Tipped / Carbide) blade
Suitable Materials	Carbon steel	Carbon steel, stainless steel, alloy steel
Cutting Speed	Fast (60–120 m/min)	Medium (≤40 m/min)
Cutting Precision	±3mm (standard)	±1mm or better (high-precision)
Thermal Effect	Moderate (visible heat-affected zone)	Minimal (smooth, clean edges)
Burr & Surface Quality	May require post-processing	Excellent; minimal finishing required
Blade Life	Shorter (200–600 cuts/blade)	Longer (1000–2000+ cuts/blade)
Investment Cost	Lower (machine + blade cost)	Higher (machine + blade cost)
Best Applications	Structural pipes, scaffolding, fluid tubes	Automotive tubing, precision pipe, export-grade pipe
Not Recommended For	Stainless / high-alloy / ultra-thick steel	Extremely thick carbon steel (>10mm)

5. Conclusion & Recommendations

The flying friction saw is ideal for high-speed, continuous production of carbon steel tubes with moderate wall thickness and standard cutting tolerance.
For precision cutting, or when working with stainless steel or alloy steel, the cold saw provides better finish and dimensional control, although at a higher cost.
For flexible and cost-effective tube mills, many manufacturers choose a dual-system configuration—friction saw for general cutting, and cold saw for special grades or high-precision tubes.

6. Common Issues & Solutions – Flying Friction Saw for ERW Tube Mill

Issue	Possible Cause	Recommended Solution
1. Pipe ends have large burrs	• Blade is worn or blunt • Cutting speed too low • Incorrect blade angle	✔ Replace or resharpen the blade ✔ Increase blade RPM ✔ Check and correct blade angle
2. Pipe cut is not straight (angled cut)	• Clamping pressure is uneven • Blade deflection • Servo tracking delay	✔ Adjust clamping force ✔ Check blade stiffness and runout ✔ Recalibrate tracking system
3. Blade breaks frequently	• Excessive feed rate • Blade quality too low • Poor blade cooling	✔ Reduce feed rate ✔ Use high-quality friction blades ✔ Improve airflow or cooling
4. Blade overheating or discoloration	• Insufficient cooling • Cutting pressure too high • Blade too dull	✔ Enhance air cooling ✔ Reduce feed force ✔ Replace dull blades promptly
5. Cutting length tolerance is unstable	• Tracking system not properly synchronized • Servo encoder error	✔ Check servo encoder calibration ✔ Synchronize tracking mechanism with line speed
6. Sparks too intense or irregular	• Blade-to-pipe contact angle incorrect • Blade not aligned with pipe center	✔ Reposition blade and realign cutting unit ✔ Adjust inclination for optimal contact
7. Abnormal vibration or noise during cutting	• Blade imbalance • Loose bearings or guide rails • Pipe not clamped tightly	✔ Balance the blade ✔ Check all mechanical fastening points ✔ Reinforce pipe clamping
8. Blade wear is uneven	• Pipe not perpendicular to blade • Inconsistent clamping or feed speed	✔ Adjust blade angle ✔ Ensure stable pipe feeding and holding

🛠️ Maintenance Tips:

🕑 Inspect the blade daily for cracks, dull teeth, and heat spots
🔩 Tighten mechanical connections weekly (clamps, bearings, guides)
💨 Check cooling system air ducts and nozzles regularly to avoid clogging
⚙️ Recalibrate servo tracking every 500 hours or when pipe length deviation exceeds tolerance
🧰 Keep spare blades and wear parts (bearings, belts) in inventory to reduce downtime

IL NOSTRO CERTIFICATO

Flying Friction Saw FAQs

1. Pipe ends have large burrs

✔ Replace or resharpen the blade ✔ Increase blade RPM ✔ Check and correct blade angle

2. Pipe cut is not straight (angled cut)

✔ Adjust clamping force ✔ Check blade stiffness and runout ✔ Recalibrate tracking system

3. Blade breaks frequently

✔ Reduce feed rate ✔ Use high-quality friction blades ✔ Improve airflow or cooling

4. Blade overheating or discoloration

✔ Enhance air cooling ✔ Reduce feed force ✔ Replace dull blades promptly

5. Cutting length tolerance is unstable

✔ Check servo encoder calibration ✔ Synchronize tracking mechanism with line speed

Prodotti correlati

6inch 168mm ERW High Speed Tube Mill from China Manufacturer

Visualizza altro

Ferrite Core For Inductor

Visualizza altro

C Purlin Cold Roll Forming Machine

Visualizza altro

HSS Circular Saw Blades For Metal Cutting

Lame circolari HSS per il taglio dei metalli

Visualizza altro

Vertical Spiral Accumulator

Visualizza altro

DFT1200(300x300mm) Direct Square to Square Forming Pipe Mill

DFT1200(300x300mm) Laminatoio per tubi per formatura diretta da quadro a quadro

Visualizza altro

Steel Coil Slitting Machine

Visualizza altro

High-Speed Steel Coil Slitting Line Manufacturer | AIS MACHINERY

Visualizza altro

Notizie correlate

2025-04-23 15:11:25

Double Cone vs. Single Arm Uncoiler – Which One to Choose?

When selecting an uncoiler for your coil processing line, choosing the right structure is critical to ensuring efficiency, stability, and long-term reliability. Two commonly used types are the Double Cone Uncoiler and the Single Arm Uncoiler. Each has its strengths and ideal use cases.

Visualizza altro

Full Automatic Adjustable C Purlin Machine

2025-04-03 17:14:07

Macchina per travetti a C completamente automatica e regolabile

La macchina per travetti a C completamente automatica e regolabile è dotata di regolazione automatica delle dimensioni del prodotto senza dover sostituire rulli o distanziatori entro 1 minuto.

Visualizza altro

2025-02-24 17:30:56

Attrezzature per la produzione di tubi in acciaio

Con la continua crescita della domanda industriale, le attrezzature per la produzione di tubi in acciaio sono gradualmente diventate uno dei prodotti più importanti sul mercato.

Visualizza altro

Consumables for Tube and Pipe Welding-How To Use Impeder and Ferrite Core

2024-12-18 14:26:53

Materiali di consumo per la saldatura di tubi e condotte: come utilizzare impeder e nucleo in ferrite

Come tutti sappiamo, per il funzionamento di un LAMINATOIO PER TUBI ERW sono necessari molti materiali di consumo e pezzi di ricambio.

Visualizza altro

How to choose nps pipe size and erw tube machine size

2024-12-17 10:34:24

Come scegliere la dimensione del tubo NPS e la dimensione della macchina per tubi ERW

Il diametro nominale del tubo (NPS) è un insieme di dimensioni standard nordamericane per tubi utilizzati per pressioni e temperature elevate o basse.

Visualizza altro

ERW pipe making machine running process flow chart

2022-10-14 11:19:50

Diagramma di flusso del processo di esecuzione della macchina per la fabbricazione di tubi ERW

I tubi saldati a punti dritti sono ampiamente utilizzati in vari settori della vita, come pilastri solari, impalcature, mobili e trasporto di acqua e gas.

Visualizza altro

Invia un messaggio

Dear customer, thank you for your attention! We provide high-quality machinery and equipment and look forward to your orders. Please inform us of your needs and we will respond quickly!