-
Telefone:86-15176910262
-
Procurar
Como escolher o tamanho do tubo NPS e o tamanho da máquina do tubo ERW
Dez . 17, 2024 10:34
Nominal Pipe Size (NPS) is a North American set of standard sizes for pipes used for high or low pressures and temperatures. "Nominal" refers to pipe in non-specific terms and identifies the diameter of the hole with a non-dimensional number (for example – 2-inch nominal steel pipe" consists of many varieties of steel pipe with the only criterion being a 2.375-inch (60.3 mm) outside diameter). Specific pipe is identified by pipe diameter and another non-dimensional number for wall thickness referred to as the Schedule (Sched. or Sch., for example – "2-inch diameter pipe, Schedule 40"). NPS is often incorrectly called National Pipe Size, due to confusion with the American standard for pipe threads, "national pipe straight", which also abbreviates as "NPS". The European and international designation equivalent to NPS is DN (diamètre nominal/nominal diameter/Nennweite), in which sizes are measured in millimetres, see ISO 6708. The term NB (nominal bore) is also frequently used interchangeably with DN.
Aplicativo
Based on the NPS and schedule of a pipe,[5] the pipe outside diameter (OD) and wall thickness can be obtained from reference tables such as those below, which are based on ASME standards B36.10M and B36.19M. For example, NPS 14 Sch 40 has an OD of 14 inches (360 mm) and a wall thickness of 0.437 inches (11.1 mm). However, the NPS and OD values are not always equal, which can create confusion.
erw tube machine size for choose and reference
|
Model |
Tube O.D |
Thickness |
Square/Rectangle |
Thickness |
Speed |
|
AIS-12 |
φ4~φ12 |
0.2~0.5 |
// |
// |
30~120 |
|
AIS-16 |
φ6~φ16 |
0.2~0.8 |
// |
// |
30~120 |
|
AIS-20 |
φ7~φ20 |
0.2~1.0 |
// |
// |
30~120 |
|
AIS-25 |
φ9~φ25.4 |
0.25~1.2 |
// |
// |
30~120 |
|
AIS-32 |
φ10~φ32 |
0.25~1.5 |
8*8~25.4*25.4 |
0.25~1.2 |
30~120 |
|
AIS-32z |
0.5~2.0 |
0.5~1.5 |
30~100 |
||
|
AIS-40 |
φ12.7~φ40 |
0.3~1.8 |
10*10~31.8*31.8 |
0.3~1.5 |
30~110 |
|
AIS-40z |
0.6~2.0 |
0.6~1.5 |
30~100 |
||
|
AIS-50q |
φ16~φ50.8 |
0.4~1.5 |
12.7*12.7~40*40 |
0.4~1.2 |
30~110 |
|
AIS-50 |
0.5~2.0 |
0.5~1.5 |
30~90 |
||
|
AIS-50z |
0.7~2.5 |
0.7~2.0 |
30~80 |
||
|
AIS-63q |
φ19.05~φ63.5 |
0.6~2.0 |
15*15~50*50 |
0.6~1.5 |
30~90 |
|
AIS-63 |
0.7~3.0 |
0.7~2.5 |
30~80 |
||
|
AIS-63z |
0.8~3.5 |
0.8~3.0 |
20~70 |
||
|
AIS-76q |
φ25.4~φ76.2 |
0.8~2.5 |
20*20~60*60 |
0.8~2.0 |
30~90 |
|
AIS-76 |
0.8~3.5 |
0.8~3.0 |
30~80 |
||
|
AIS-76z |
0.8~4.0 |
0.8~3.5 |
20~70 |
||
|
AIS-90q |
φ30~φ90 |
0.8~3.0 |
25*25~70*70 |
0.8~2.5 |
30~90 |
|
AIS-90 |
0.8~3.5 |
0.8~3.0 |
30~80 |
||
|
AIS-90z |
1.0~4.0 |
1.0~3.5 |
20~70 |
|
AIS-100q |
φ31.8~φ101.6 |
1.0~3.0 |
25*25~80*80 |
1.0~2.5 |
30~90 |
|
AIS-100 |
1.0~3.75 |
1.0~3.25 |
30~80 |
||
|
AIS-100z |
1.0~4.25 |
1.0~3.5 |
20~70 |
||
|
AIS-114q |
φ35~φ114.3 |
1.0~3.0 |
30*30~90*90 |
1.0~2.5 |
20~80 |
|
AIS-114 |
1.2~4.5 |
1.2~4.0 |
20~70 |
||
|
AIS-114z |
φ40~φ114.3 |
1.2~5.0 |
1.2~4.5 |
15~60 |
|
|
AIS-127q |
φ40~φ127 |
1.2~3.5 |
40*40~100*100 |
1.2~3.0 |
20~70 |
|
AIS-127 |
1.5~5.0 |
1.5~4.5 |
15~60 |
||
|
AIS-127z |
φ50~φ127 |
1.5~5.5 |
1.5~5.0 |
10~45 |
|
|
AIS-140q |
φ50~φ141.3 |
1.2~4.0 |
50*50~110*100 |
1.2~3.5 |
15~60 |
|
AIS-140 |
1.5~5.5 |
1.5~5.0 |
10~50 |
||
|
AIS-140z |
φ60~φ141.3 |
2.0~6.0 |
2.0~5.5 |
10~40 |
|
|
AIS-168q |
φ60~φ168.3 |
1.5~5.0 |
60*60~130*130 |
1.5~4.5 |
10~50 |
|
AIS-168 |
2.0~6.0 |
2.0~5.5 |
10~50 |
||
|
AIS-168z |
φ76.2~φ168.3 |
2.5~8.0 |
2.5~7.0 |
10~40 |
|
|
AIS-219q |
φ89.1~φ219.1 |
2.0~6.0 |
70*70~160*160 |
2.0~5.5 |
10~50 |
|
AIS-219 |
3.0~8.0 |
3.0~7.0 |
10~40 |
||
|
AIS-219z |
4.0~10.0 |
4.0~9.0 |
10~40 |
||
|
AIS-273 |
φ114.3~φ273 |
4.0~10.0 |
90*90~200*200 |
4.0~9.0 |
10~40 |
|
AIS-273z |
4.5~12.0 |
120*60~260*130 |
4.5~11.0 |
10~35 |
Details welcome send email to know more.
Produtos relacionados
Notícias relacionadas
2025-04-23 15:11:25
Double Cone vs. Single Arm Uncoiler – Which One to Choose?
When selecting an uncoiler for your coil processing line, choosing the right structure is critical to ensuring efficiency, stability, and long-term reliability. Two commonly used types are the Double Cone Uncoiler and the Single Arm Uncoiler. Each has its strengths and ideal use cases.
2025-04-03 17:14:07
Máquina de purlin C ajustável totalmente automática
A máquina de corte de perfis C totalmente automática e ajustável vem com ajuste automático do tamanho do produto sem necessidade de troca de rolos ou espaçadores em 1 minuto.
2025-02-24 17:30:56
Equipamentos para fabricação de tubos de aço
Com o crescimento contínuo da demanda industrial, os equipamentos de fabricação de tubos de aço têm se tornado gradualmente um dos produtos importantes no mercado.
2024-12-18 14:26:53
Consumíveis para soldagem de tubos e canos - Como usar núcleo de ferrite e impedância
Como todos sabemos, na operação da MOINHO DE TUBOS ERW, são necessários muitos consumíveis e peças de reposição.
2024-12-17 10:34:24
Como escolher o tamanho do tubo NPS e o tamanho da máquina do tubo ERW
Tamanho nominal de tubo (NPS) é um conjunto norte-americano de tamanhos padrão para tubos usados para altas ou baixas pressões e temperaturas.
2022-10-14 11:19:50
Fluxograma do processo de execução da máquina de fabricação de tubos ERW
Tubos soldados com costura reta são amplamente utilizados em vários setores da vida, como pilares solares, andaimes, móveis e transporte de água e gás.
Enviar uma mensagem
Dear customer, thank you for your attention! We provide high-quality machinery and equipment and look forward to your orders. Please inform us of your needs and we will respond quickly!
Portuguese 
English 
Albanian 
Arabic 
French 
German 
Indonesian 
Italian 
Japanese 
Kazakh 
Korean 
Latin 
Macedonian 
Russian 
Spanish 
Thai 
Turkish 
Ukrainian 
Uzbek