Impeder Rods for High Frequency Welding

Fiberglass+Ferrite+copper end

Return flow of cooling liquid ( round , square and rectangular sections )

Through flow impeders are the most common type of impeders and are a relatively simple concept, our designs ensure maximum high quality ferrite mass is placed within a well-constructed assembly. The result is improved performance, saving you money and increasing productivity.

mpeders must be always well proportioned and always together with inductors since together they create the electromagnetic inductive circuits that allow a good and efficient induction welding.

The high-frequency welding impeder is a critical component within welded tube production lines, typically installed inside the pipe near the weld seam. Its primary function is to guide and concentrate the high-frequency current along the strip edges, preventing current from dispersing through the center of the tube. This intensifies both the skin and proximity effects, ensuring fast and focused heating at the weld zone.

Impeders are generally constructed using high-permeability ferrite materials or iron-core assemblies, and can be configured in various shapes and sizes to suit specific production needs. A well-designed impeder improves energy efficiency, enhances weld consistency, and stabilizes the heating process—leading to stronger, cleaner welds and higher line speeds.

In addition to improving electrical efficiency, quality impeders offer excellent thermal resistance, mechanical strength, and magnetic performance, allowing them to withstand the demanding environment of continuous high-frequency operations. Proper selection based on parameters such as pipe diameter, operating frequency, and welding power is essential for achieving optimal welding results.

All of our impeders are designed to ensure effective cooling and protection of the ferrite core inside the construction. It is essential that ferrite is properly cooled  to maximise welding efficiency and maintain stable parameters for product quality.

Standard through flow impeders – Ferrite is totally enclosed inside the casing  

Exposed Ferrite impeders – around 10-15% of the end of the ferrite protrudes from the casing  

We have standard male imperial couplings but can offer metric or other threads on request.

Impeders are available in length options of 230mm, 330mm & 430mm.

Impeder Cooling: Все наши импедеры разработаны для обеспечения эффективного охлаждения и защиты ферритового сердечника внутри импедера. Важно, чтобы феррит охлаждался эффективно, чтобы максимизировать эффективность сварки и поддерживать стабильные параметры качества продукции. Охлаждающая жидкость должна быть чистой, желательно отфильтрованной. Давление обеспечит достаточное охлаждение в большинстве рабочих условий. Требования к потоку охлаждающей жидкости сильно различаются в зависимости от температуры на входе, мощности сварки, частоты и геометрии зоны сварки. В ситуациях с высокой плотностью мощности и при высоких температурах окружающей среды небольшой охладитель для охлаждающей жидкости импедера и рабочей катушки может значительно повысить эффективность. Cooling by air or other gas is not recommended, but can be useful in special situations where the presence of water inside the tube cannot be tolerated. Gas, such as nitrogen, have a density that is at least 1,000 times less than that of water, so coolant volume must be increased accordingly.

1. Enter Section Equipments
2.  
3. 1. Coil car and Storage
4. 2.Single And Double Heads Un-coiler & Hydraulic And Pneumatic Un-coiler
5. 3.Peeler and hold down roll arm
6. 4.Flattening Machine
7. 5.Automatic and Semi Auto Shearer & Butt Welder
8. 6.Vertical Cage Accumulator​ & Horizontal Loop Accumulator & Landing Horizontal Spiral Loop Accumulator
   

1.  
2. 1. Машина вихретокового контроля
3. 2. Seam annealing machine
   
4. 3. Straightener machine
   
5. 4. Chamfer and end facer machine
   
6. 5. Hydro Tester machine
   
7. 6. Threading machine
   
8. 7. Painting and oil machine
   
9. 8. Automatic bundle and package machine

1.  
2. 1. Rollers, Moulds, Dies, D2,D3 material to choose
3. 2. Ferrite, Impeder, Fiberglass tube
   
4. 3. HSS saw blades, TCT Saw blades, Friction saw blades
   
5. 4. OD burr remove inserts, ID burr remover inserts
   
6. 5. HF welder Induction Coil and other HF welder spare parts
   
7. 6. Copper tube for induction Coil, PTFE pipe for Induction Coil
   
8. 7. Mosfet, Boards
   
9. 8. Steel pipe Strapping machine
   
10. 9. Zinc Spray Machine, Zinc wire, Zinc spray gun

1. Почему стоит выбрать нас?
   

2. 1.Leading Technology, Reliable Quality, Excellent Service! Оптимизированный дизайн, выбор высококачественных материалов!  Гарантия процесса термообработки!

3. 2.Spiral bevel gear, drum gear coupling and carburization. Закалка зубьев шестерен. Приводная система стабильна, эффективна и удобна в использовании с низким уровнем шума.

4. 3.High precision wear resisting and Long life of toolings. Все токарные станки, шпоночные пазы позиционируются и фрезеруются с помощью ЧПУ.

5. 4.Quality department make sure the material of the raw materials quality, and ensure the machine running perfect.

Послепродажное обслуживание

1. 1.Machine test running videos will supply to customer before shipment.
2. 2.Online techenical support WHOLE LIFT FREE.
   
3. 3.Professional engineers team to install the machine,  train your employee well.
   
4. 4.One year warranty and life-long technical support.
   
5. 5,24 часа на ответ инженера.
   
6. 6.Ваши деловые отношения с нами будут конфиденциальны для любых третьих лиц.
7. 7.  We welcome customers to visit our factory anytime.