ERW 튜브 및 파이프 용접용 임피더

ERW 탄소강 튜브 밀

튜브 밀 기계 구성

콜드롤 성형기

스틸 코일 슬리팅 라인

탄소강 코일 슬리팅 라인

길이에 맞춰 절단된 강철 코일 라인

보조 장비 및 예비 부품

Impeder for ERW Tube and Pipe Welding

An impeder is essential for producing durable, corrosion-resistant steel tubes. Installed inside the pipe during high-frequency welding, it directs magnetic flux for precise heating. This reduces energy consumption, extends tool life, and guarantees reliable weld seams, giving pipe manufacturers both performance and cost advantages.

제품 세부 정보

지금 연락하세요

제품 세부 정보

동영상

제품 설명

1. Introduction

2. Key Functions and Benefits

• Focuses Welding Energy – Guides high-frequency current directly to pipe edges.
• Improves Weld Quality – Produces strong, smooth, and defect-free weld seams.
• Reduces Energy Costs – Lowers power consumption by up to 25–30%.
• Prevents Overheating – Water-cooled casing protects ferrite and extends service life.
• Supports Different Pipe Shapes – Suitable for round, square, and rectangular tubes.

3.Product Parameters

매개변수	Typical Range	Notes
Tube Outer Diameter (OD)	10mm – 273mm	Customizable based on mill design
Tube Wall Thickness	0.5mm – 16mm	Varies with tube type
Impeder Length	200mm – 500mm	Can be customized for specific applications
재료	Ferrite (YYKCB or equivalent)	High magnetic permeability
Operating Temperature	≤ 250°C	Standard for HF welding
Surface Finish	Smooth and precise	Reduces friction and ensures stability
Application Type	Single-pass / Multi-pass ERW mills	Suitable for various welding setups

Note: All parameters can be tailored to match specific ERW mill requirements.

4. Applications

• ERW Pipe & Tube Production Lines – Carbon steel, galvanized steel, stainless steel.
• Automotive Tubing – Exhaust pipes, structural tubes.
• Construction Industry – Scaffolding, square & rectangular pipes.
• Oil & Gas Industry – High-strength pipelines.
• Mechanical Tubing – Precision welded tubes for machinery.

5. Why Impeders Are Essential in ERW Welding

With Impeder	Without Impeder
Concentrated heating at weld edges	Energy spreads across pipe wall
Strong, smooth weld seam	Weak, inconsistent weld seam
Lower power consumption	Higher energy costs
Longer equipment life	Overheating & damage to parts
Higher production efficiency	Lower welding speed & output

6. Frequently Asked Questions About Impeders❓

Q1: What is an Impeder in ERW tube welding?
An impeder is a device used in ERW pipe mills to concentrate high-frequency current at the weld edges, ensuring efficient heating and strong welds.

Q2: Why is an impeder important for welding quality?
Without an impeder, welding energy is wasted across the pipe wall, leading to weak seams, higher power consumption, and reduced efficiency.

Q3: What sizes of impeders are available?
Impeders can be customized for pipe diameters from 10 mm up to 630 mm, with different lengths, casings, and ferrite grades.

Q4: What is the impeder made of?
The core is made of ferrite rods, and the casing is usually stainless steel, brass, or fiberglass. Most designs include water cooling to prevent overheating.

Q5: Can one impeder be used for all pipe sizes?
No. The impeder must be matched to the pipe size, frequency, and production speed to achieve the best performance.

✅OUR SERVICE

왜 우리를 선택하시나요?

선도적인 기술, 신뢰할 수 있는 품질, 탁월한 서비스!

최적화된 디자인, 고품질 소재 선택!

열처리 과정 보증!

스파이럴 베벨기어, 드럼기어 커플링 및 탄화.

기어 이빨 담금질.

구동 시스템은 안정적이고 효율적이며 소음이 적고 내구성이 뛰어납니다.

고정밀 내마모성과 롤러의 긴 수명을 자랑합니다.

모든 기계 선반과 키 홈은 CNC로 위치가 지정되고 밀링됩니다.

우리의 서비스

사전 판매 서비스

1. We can provide machine running videos for reference

2. We will recommend the most suitable equipment according to the needs of customers

3. We can provide the layout of the factory

4. We welcome customers to visit our factory

애프터서비스

1. 우리는 기계를 제때 배달하고 문서를 제공하여 귀하가 기계를 빨리 받을 수 있도록 보장합니다.

2. 준비 조건을 마치면 빠르고 전문적인 애프터 서비스 엔지니어 팀이 귀사의 공장으로 가서 기계를 설치하고, 작동 설명서를 제공하고, 귀사 직원이 기계를 잘 작동할 수 있을 때까지 교육합니다.

3. 1년 보증과 평생 기술 지원을 제공합니다.

4. 잘 훈련되고 경험이 풍부한 직원이 영어와 중국어로 모든 문의에 답변합니다.

엔지니어가 응답하기까지 5.24시간이 걸립니다.

6. 귀사와 당사 간의 사업 관계는 모든 제3자에게 비밀로 유지됩니다.

품질 관리

당사는 원자재의 품질이 양호함을 확인하고 기계가 원활하게 작동하도록 보장하는 단일 품질 관리 부서를 갖추고 있습니다.

연락하기

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.

* 이름

* 이메일

핸드폰

*메시지

Frequently Asked Questions About Impeders

What is an Impeder in ERW tube welding?

An impeder is a device used in ERW pipe mills to concentrate high-frequency current at the weld edges, ensuring efficient heating and strong welds.

Why is an impeder important for welding quality?

Without an impeder, welding energy is wasted across the pipe wall, leading to weak seams, higher power consumption, and reduced efficiency.

What sizes of impeders are available?

Impeders can be customized for pipe diameters from 10 mm up to 630 mm, with different lengths, casings, and ferrite grades.

What is the impeder made of?

The core is made of ferrite rods, and the casing is usually stainless steel, brass, or fiberglass. Most designs include water cooling to prevent overheating.

Can one impeder be used for all pipe sizes?

No. The impeder must be matched to the pipe size, frequency, and production speed to achieve the best performance.

관련 뉴스

2026-04-18 03:20:20

AIS Machinery Showcases Advanced Tube Solutions at Tube & Wire Düsseldorf 2026

Tube & Wire Düsseldorf 2026, one of the most influential exhibitions in the global tube and wire industry, held biennially in Düsseldorf, Germany

2027-04-17 00:00:00

Southeast Asia Client Visits Our Factory | Customized Tube Mill Solution Delivered

A Southeast Asia client visited our ERW tube mill factory to inspect production lines and discuss a customized tube mill solution. Impressed by our machine quality, welding performance, and engineering support, the client confirmed strong cooperation intentions. Discover how our ERW tube mill solutions improve efficiency, precision, and long-term production reliability.

2026-04-16 02:35:12

Professional Cold Roll Forming Machine Factory for Production

In the modern industrial landscape, the precision of metal shaping is the cornerstone of quality manufacturing. Partnering with a professional cold roll forming machine factory is essential for businesses looking to optimize their production lines, reduce material waste, and ensure high-dimensional accuracy. Whether you are producing C-channels, square tubes, or custom profiles, the choice of machinery determines your competitive edge in the market. This guide will explore the critical factors in selecting a factory and the technical advantages of advanced roll forming technology to help you make an informed investment.

2026-04-15 10:37:55

Flat Bar Production Line for Steel Coils: How It Works & Why It Matters

Looking for a flat bar production line? Learn how it turns steel coils into ready-to-use flat bars with precise length and high straightness. Compare it with slitting lines and get the best solution for your steel processing needs.

2026-04-14 00:00:00

Looking for a Milling Saw for ERW Tube Mill? Here’s What You Need to Know

Looking for a high-performance milling saw for your ERW tube mill? Upgrade to burr-free, high-precision pipe cutting with advanced flying saw technology. Improve efficiency, reduce rework, and meet export standards for carbon steel, stainless steel, and API pipes. Contact us today for expert solutions and competitive pricing tailored to your production needs.

2026-04-09 16:15:19

5-Inch (127mm) ERW Tube Making Machine Delivered with Heavy-Duty Design and Advanced Quick Change System

2027-04-07 00:00:00

Metal Embossing Machine: Turn Flat Sheets into High-Value Textured Products

Discover how a metal embossing machine transforms flat steel, stainless steel, and aluminum sheets into high-value textured products. Learn about its working principle, key components, and applications. Ideal for decorative and industrial use, embossing machines improve both appearance and performance. Explore complete embossing line solutions and find the right machine for your production needs.

2026-04-04 20:37:18

Automatic Double Side Uncoiler with Hydraulic Expansion and Auto Rotation for Steel Coil Processing

The Automatic Double Side Uncoiler is a high-efficiency solution designed for modern steel coil processing lines, including tube mills, roll forming machines, and slitting lines. With a maximum capacity of 4 tons per side, this machine ensures stable and continuous coil feeding while reducing downtime during coil change.

메시지 보내기

Dear customer, thank you for your attention! We provide high-quality machinery and equipment and look forward to your orders. Please inform us of your needs and we will respond quickly!