Pipe Straightener Machine

4. Main Components

1. Machine Base – Welded steel frame supporting the system;

2. Straightening Rollers – Core units arranged in top and bottom sets for pipe correction;

3. Drive System – Motor + gearbox + chains/gears to rotate the rollers;

4. Adjustment Mechanism – To adjust roller gap and angle for different pipe sizes;

5. Guide Device – Ensures precise entry of the pipe into the rollers;

6. Control Panel – For setting speed, pressure, and roller position;

7. Safety Devices – Emergency stop buttons, protective covers, etc.

5. Operation Procedure

1. Preparation:

   • Ensure power and lubrication systems are functioning;

   • Adjust roller spacing according to pipe specifications.

2. Startup Settings:

   • Set appropriate straightening speed;

   • Start motor and ensure smooth rotation of rollers.

3. Feeding and Straightening:

   • Feed the welded pipe from upstream equipment;

   • Pipe passes through rollers and is straightened under pressure.

4. Output and Inspection:

   • Straightened pipes are delivered to the next process;

   • Visually or dimensionally inspect for straightness and surface quality.

6. Maintenance

Daily Maintenance:

• Inspect rollers for wear or damage;

• Check for loose bolts or fasteners;

• Clean machine surfaces to prevent jamming;

• Lubricate moving parts (recommended daily).

Periodic Maintenance (monthly or quarterly):

• Calibrate roller angles and spacing;

• Check electrical components for loose connections or overheating;

• Maintain electric/hydraulic adjustment systems (if equipped);

• Replace excessively worn parts.

Precautions:

• Do not process non-standard or oversized pipes;

• Avoid long idle running;

• Stop the machine immediately if abnormal noise, vibration, or jamming occurs.

•  

1. Enter Section Equipments
2.  
3. 1. Coil car and Storage
4. 2.Single And Double Heads Un-coiler & Hydraulic And Pneumatic Un-coiler
5. 3.Peeler and hold down roll arm
6. 4.Flattening Machine
7. 5.Automatic and Semi Auto Shearer & Butt Welder
8. 6.Vertical Cage Accumulator​ & Horizontal Loop Accumulator & Landing Horizontal Spiral Loop Accumulator
   

1.  
2. 1. 와류기
3. 2. Seam annealing machine
   
4. 3. Straightener machine
   
5. 4. Chamfer and end facer machine
   
6. 5. Hydro Tester machine
   
7. 6. Threading machine
   
8. 7. Painting and oil machine
   
9. 8. Automatic bundle and package machine

1.  
2. 1. Rollers, Moulds, Dies, D2,D3 material to choose
3. 2. Ferrite, Impeder, Fiberglass tube
   
4. 3. HSS saw blades, TCT Saw blades, Friction saw blades
   
5. 4. OD burr remove inserts, ID burr remover inserts
   
6. 5. HF welder Induction Coil and other HF welder spare parts
   
7. 6. Copper tube for induction Coil, PTFE pipe for Induction Coil
   
8. 7. Mosfet, Boards
   
9. 8. Steel pipe Strapping machine
   
10. 9. Zinc Spray Machine, Zinc wire, Zinc spray gun

1. 왜 우리를 선택하시나요?
   

2. 1.Leading Technology, Reliable Quality, Excellent Service! 최적화된 디자인, 고품질 소재 선택!  열처리 과정 보증!

3. 2.Spiral bevel gear, drum gear coupling and carburization. 기어 이빨 담금질. 구동 시스템은 안정적이고 효율적이며 소음이 적고 내구성이 뛰어납니다.

4. 3.High precision wear resisting and Long life of toolings. 모든 기계 선반과 키 홈은 CNC로 위치가 지정되고 밀링됩니다.

5. 4.Quality department make sure the material of the raw materials quality, and ensure the machine running perfect.

애프터서비스

1. 1.Machine test running videos will supply to customer before shipment.
2. 2.Online techenical support WHOLE LIFT FREE.
   
3. 3.Professional engineers team to install the machine,  train your employee well.
   
4. 4.One year warranty and life-long technical support.
   
5. 엔지니어가 응답하기까지 5.24시간이 걸립니다.
   
6. 6. 귀사와 당사 간의 사업 관계는 모든 제3자에게 비밀로 유지됩니다.
7. 7.  We welcome customers to visit our factory anytime.