Selecting a Square Tube Mill for DFT1200 Section and Coil Requirements

Nov . 18, 2026 00:58

Share:

The DFT1200 square tube mill fits square and rectangular hollow-section programs using low carbon or galvanized steel, provided your section sizes, wall thicknesses, coil dimensions, and cut lengths match the line’s working range.

Selecting a Square Tube Mill for DFT1200 Section and Coil Requirements
Illustration for reference; see the product page for actual photos and specifications.

100x100mm to 300x300mm

Square hollow section

80x120mm to 400x200mm

Rectangular hollow section

3.0mm to 12mm

Square tube thickness

6 meter to 12meter

Tube cut length

A square tube mill should be selected from the finished sections you need to sell and the coils you can supply. The DFT1200(300x300mm) Direct Square to Square Forming Pipe Mill is suited to square and rectangular hollow-section production with direct square forming, automatic tooling adjustment, and an integrated production route.

1

Start with the finished section list

The DFT1200 produces square hollow sections from 100x100mm to 300x300mm and rectangular hollow sections from 80x120mm to 400x200mm. Square tube thickness is 3.0mm to 12mm, and tube cut length is 6 meter to 12meter.

ParameterDFT1200 range
Square hollow section100x100mm to 300x300mm
Rectangular hollow section80x120mm to 400x200mm
Square tube thickness3.0mm to 12mm
Tube cut length6 meter to 12meter

Choose this line when your regular size schedule fits these ranges. Check the smallest and largest square sections, then review the rectangular sizes separately because the two production ranges are different.

2

Match the mill to your incoming steel

The line processes low carbon steel and galvanized steel in Q195-Q355 grades. The material limits are δb≤500Mpa tensile strength and δs≤345Mpa yield strength. Strip width is Min 400mm and Max 1200mm, while strip thickness is Min 3.0 and Max 12.0 mm.

Coil handling also affects the equipment fit. The maximum coil OD is 2200mm, the coil ID is 610mm depending on customer order, and the maximum coil weight is 30,000 kg. Compare these values with the coils assigned to your square tube program before you finalize the line arrangement.

3

Assess the direct square forming setup

Direct square forming begins shaping the strip into a square profile when forming starts. The DFT1200 uses the same set of toolings for different square and rectangular tube sizes, and you can adjust the toolings automatically by pressing a button.

This setup suits production schedules that move between several square and rectangular sizes. It reduces the need to change tooling molds between those sizes. The direct square process can save at least 5% of strip cost and at least 50% of mold cost. Automatic adjustment can save the equivalent of 3 labor costs. Compare these potential savings with your own coil consumption, size mix, and changeover schedule.

4

Check the line sections against your process

The entry section includes a coil skid, coil car, uncoiler, coil opener with hold down roll, pinch roll with centering device, automatic shear and welder, and horizontal strip accumulator. The forming route includes the forming mill, seam guide roll stand, squeeze roll stand, solid state H.F. induction welder GGp800KW, outside bead scraping device, and water cooling trough.

After forming and welding, the line includes sizing roll stands, a Turk’s head stand, milling saw, driven roller run out table, inspection table, and collectors. The finishing section includes a straightener machine, one head chamfer machine, one head hydro tester machine, and automatic package machine.

Select this configuration when your production route requires these stages from coil entry through finished package. Check the available plant space and the planned sequence before requesting final configuration.

What to weigh

Finished sectionsmatch square and rectangular sizes, thicknesses, and cut lengths.
Incoming coilscompare steel grade, strength, strip dimensions, and coil limits.
Tooling changesassess one tooling set and automatic adjustment for size changes.
Line scopematch entry, forming, welding, sizing, cutting, finishing, and packaging stages.

Your shortlist

DFT1200(300x300mm) Direct Square to Square Forming Pipe Millsquare sections from 100x100mm to 300x300mm.
DFT1200(300x300mm) Direct Square to Square Forming Pipe Millrectangular sections from 80x120mm to 400x200mm.

Prepare the information for line selection

Send your target square and rectangular sizes, wall thicknesses, steel grades, strip widths, coil dimensions, coil weights, and cut lengths for review. Include the frequency of size changes so the tooling arrangement can be assessed against your production schedule. This information allows us to check the DFT1200 square tube mill against the products you intend to make.

The company

HEBEI AIS MACHINERY EQUIPMENT CO.,LTD

Hebei AIS Machinery Equipment located in Shijiazhuang city, Hebei Province, China CN.Factory have passed the certification of ISO, CE and SGS which is a professional supplier of ERW Tube Mill Machine, High-Frequency Longitudinal Welded Pipe Making Machine, API Pipe Mill, FFX Induction Welding Pipe Making Machine, DFT Direct Forming to Square Pipe Mill, Cold Roll Forming Machine, Multi-functional Tube Mill Machine , Steel Coil Slitting line, Cut to Length Line and other Spare Parts.…

About Us ↗Visit company website ↗

Related News

Selecting a Square Tube Mill for DFT1200 Section and Coil Requirements

2026-11-18 00:58:51

Selecting a Square Tube Mill for DFT1200 Section and Coil Requirements

Choose a square tube mill by checking DFT1200 section sizes, steel coil limits, wall thickness, tooling changes, and line stages.

How to Choose a Run Out Table for an ERW Tube Mill

2026-11-10 01:16:30

How to Choose a Run Out Table for an ERW Tube Mill

Choose a run out table for an ERW tube mill by matching pipe size, length, weight, conveyor type, speed, and finishing-section layout.

ERW Pipe Mill for Sale: Buyer FAQs for a 76 mm Line

2026-11-02 02:23:25

ERW Pipe Mill for Sale: Buyer FAQs for a 76 mm Line

Review the 21.3 mm to 76 mm range, materials, equipment, speed, power, cutting methods, and production controls for an ERW pipe mill for sale.

High-Speed Steel Coil Slitting Line FAQ: Specifications, Ordering and Support Questions

2026-10-29 00:44:48

High-Speed Steel Coil Slitting Line FAQ: Specifications, Ordering and Support Questions

Get direct answers about High-Speed Steel Coil Slitting Line specifications, material compatibility, component layout, process steps, quality standards, and after-sales support from HEBEI AIS MACHINERY EQUIPMENT CO.,LTD.

Choosing a Steel Pipe Making Machine Manufacturer: Working Requirements and Integration Fit for the 10inch 273mm ERW Pipe Mill

2026-10-28 00:06:34

Choosing a Steel Pipe Making Machine Manufacturer: Working Requirements and Integration Fit for the 10inch 273mm ERW Pipe Mill

Learn the key working requirements and integration criteria for selecting a steel pipe making machine manufacturer. Covers diameter range, wall thickness, strip grade, HF welding power, footprint, and electrical supply using the 10inch 273mm ERW Pipe Making Machine from HEBEI AIS MACHINERY EQUIPMENT CO.,LTD.

Choosing a Flying Cold Saw: Working Requirements and Integration Fit

2026-10-28 00:05:55

Choosing a Flying Cold Saw: Working Requirements and Integration Fit

Learn the key selection criteria for a flying cold saw — pipe diameter, line speed, cut precision, blade type, and PLC integration — to find the right cold cutting flying saw machine for your ERW tube mill.

Choosing GGP 100kw Solid State High Frequency Induction Heating Welding Machine: Working Requirements and Integration Fit

2026-10-28 00:05:28

Choosing GGP 100kw Solid State High Frequency Induction Heating Welding Machine: Working Requirements and Integration Fit

Evaluate whether the GGP 100kw Solid State High Frequency Induction Heating Welding Machine fits your ERW pipe production line. This guide covers power requirements, cooling infrastructure, electrical supply, and control integration criteria.

Choosing Quick-Change System for Forming & Sizing Section: Application Fit and Specification Checks

2026-10-28 00:04:41

Choosing Quick-Change System for Forming & Sizing Section: Application Fit and Specification Checks

Learn the key selection criteria for a Quick-Change System for Forming & Sizing Section in ERW tube mills — covering changeover frequency, cassette structure, pneumatic couplings, and application scope for structural, automotive, and export tube production.

Send a Message

Dear customer, thank you for your attention! We provide high-quality machinery and equipment and look forward to your orders. Please inform us of your needs and we will respond quickly!

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


en_USEnglish